제품소개

Mechanical Seal과 Rotary Joint의 최대 제조업체

CGS

산업용 송풍기, 컴프레셔, 팬, 믹서, 교반기, 반응기 등에 사용하는 싱글 드라이 가스 씰 입니다.

고속회전 및 고압용으로 사용 할 수 있으며 최소한의 누설이 허용됩니다.

CGS 씰은 싱글, 더블 또는 탠덤 카트리지 씰로 사용할 수 있습니다.

  • CGS의 특별한 성능
  • - 고속회전 및 고압에서 건식 운전이 가능합니다.
    - 비접촉으로 운전 합니다.
       나선형 홈의 펌핑 작용은 섭동면 사이에 가스 압력을 발생시키고, 그 압력은 양면을 미세하게 분리하는 작용을 합니다.
       일반적으로 막두께는 2.5μm ~ 5.0μm 입니다.
    - 윤활이 필요없습니다.
      드라이 런닝 기술은 섭동면 윤활 불량에 의한 잦은 유지 보수와 윤활액에 의한 제품 오염을 우려하지 않아도 됩니다.
  • CGS-Single dry gas seal
  • This seals are used with no addition back up seal. Labyrinths seals, radial clearance seals are optional. This seal is used as an emission free with according flare or vent system.
  • CGS-Tandem seal
  • This seals are admissible on process gas leakage on gas pipeline compressors. This tandem arrangements are especially operational safety. Because the out-board seal act as safety seal even if the in-board seal is leakaged.
  • CGS-Double seal
  • The gas in-board side leakages to out-board side are inadmissible. The applications are suitable for chemical indstry. Buffer gas should be fed at higher pressure than in-board side pressure.
  • Operating Capabilities
  • - Temperature : -40 ~ 250℃
    - Pressure : 5.0 Mpa
    - Speed : 60 m/s
  • Applications
  • - Temperature : Oil and gas industry
    - Petrochemical industry
    - Refining technology
    - Hydrocarbon gas
    - Nitrogen gas
    - Refining technology
    - Centrifugal compressors
    - Blowers